I have a Swann DVR-4575 with two cameras connected (Ch1 and Ch2).
The DVR-4575 is not currently connected to a monitor and was setup with a password but is now accessed via Home View.
Everything appears to be configured properly and I can monitor the cameras in the Main View.
I am having difficulty working out how to set the cameras recording.
If I go into Control Panel > Local Record Management.
Record Management = Ch1 and Ch2 > Strategy0 > Switch file 30 minutes, Main Stream, Every day 00:00 to 00:00
But if I go into Record Schedule it shows:
Local Record Setting > Loop Recording, 30 days, auto overwrite - but nothing appears in the panel below?
Local Record Information > both Ch1 and Ch2 say Record SubStream, Expect Status Error, Recording Status Recording Stop
I can't change the settings on this page as click and right click don't do anything.
I've checked every setting on every page and I have checked the logs but there is nothing I can seem to do.
I've checked the manual but the screen shots in the manual don't match the software I am using.
If anyone could point me in the right direction I would appreciate it.